Jenn-Air JGR8895BDS Instructions Pour L'installation page 13

11. Position the oven bake burner over the orifice hood and
reinstall using 2 screws.
A. Bake burner orifice hood
B. Oven bake burner
C. Oven bake burner screws
To Convert Upper Oven Bake Burner
12. Repeat steps 1through 8 above for conversion of the upper
oven bake burner.
13. Remove the Number .0585 Natural gas orifice spud in the
upper oven and replace with a Number .038 LP gas orifice
spud.
14. Reverse steps to reinstall the orifice covers, oven bake
burners, oven baffles and oven bake covers in both ovens.
To Convert Oven Broil Burner
1. Remove broil burner screw and set aside.
2. Remove the broil burner from the broil burner orifice hood.
The broil burner will hang in the back of the oven while
changing the orifice hood.
B
A. Broil burner screw
B. Broil burner orifice hood
All manuals and user guides at all-guides.com
B
A
C
A
3. Turn the Number 1.42 Natural gas broil burner orifice hood
counterclockwise to remove.
A. Number 1.42 Natural gas broil burner orifice hood
4. Install the green Number .38 LP gas broil burner orifice hood,
turning it clockwise 4 or 5 turns. Do not overtighten.
A. Number .38 LP gas broil burner orifice hood
5. Place the broil burner on the broil burner orifice hood. Insert
the broil burner locator pin in the hole in the oven back.
6. Position the broil burner against the roof of the oven cavity
and attach with screw.
A B
A. Broil burner orifice hood
B. Broil burner
C. Broil burner locator pin
D. Broil burner locator hole
A
A
.38
C
D
13