Electrical Connections; Check Burners; Check Surface Burners - Cafe CGU366 Instructions D'installation

6

ELECTRICAL CONNECTIONS

WARNING
Shock Hazard: This appliance must
be properly grounded. Failure to do so can result in
electric shock.
NOTE:
recommended for this product.
Grounding
minimize the possibility of electric shock hazard from
this appliance.
circuit checked by a qualified electrician to make sure
the receptacle is properly grounded.
REMOVE THE THIRD (GROUND) PRONG FROM
THE POWER CORD. DO NOT USE AN ADAPTER.
DO NOT USE AN EXTENSION CORD.
Ground Fault Circuit Interrupters (GFCI's) are not
required or recommended for gas range receptacles.
nuisance tripping of the GFCI breaker is possible.
12
Installation
Ensure proper
before use
7

CHECK BURNERS

WARNING
A. Burners
positions on cooktop.
B. Caps
C. Grates
interchangeable. Place the grates on the cooktop.
Burner Cap Properly Seated
Burner Cap Not Properly Seated
8

CHECK SURFACE BURNERS

Push and turn a knob to the LITE position. A clicking
sound indicates proper operation of the ignition
knob out of the LITE position. Try each burner in
succession until all burners have been checked.
Quality of Flames
Determine the quality of flames visually. Normal
burner flames should look like (A) or (B).
heated or signs of flickering orange due to particles in
the gas or air.
(A) Soft blue flames—
Normal for natural gas
(B) Yellow tips on
outer cones—
Normal for propane (LP) gas
31-2000816 Rev. 2