All manuals and user guides at all-guides.com
Hands-Free Visor Microphone Installation
Instruction
The hands-free visor microphone is designed to clip onto the vehicle's
sun visor.
Note: The microphone should never be mounted near a window or in a
spot where road and ambient background noise will be substantially
high (above 85dB SPL).
1. Referring to Figure 6, clip the microphone to the vehicle's visor.
2. To avoid visual or physical obstruction, route the microphone cable
down inside the door molding and beneath the seat. Allow sufficient
slack at the connector end of the cable to reach the receptacle of the
junction box.
3
Plug the cable into the junction box (see figure 3, Junction Box
installation).
Figure 6. Installing the Microphone
4
For optimal visor microphone performance, refer to figure 7 below.
Figure 7. Optimal visor microphone performance
CAR KIT OWNER'S MANUAL
Visor
Hands-Free
Microphone
11