Replacing Belt - Panasonic MC-GG233 Manuel D'utilisation

Replacing Belt

Motor Shaft
Arbre
d'entraînement
du moteur
Eje del motor
Belt
Courroie
Correa
Agitator
Agitateur
Agitador
Belt
Motor Shaft
Courroie
Arbre
Correa
d'entraînement
du moteur
Eje del motor
Agitator
Agitateur
Agitador
Nozzle
Tête
d'aspiration
Boquilla
All manuals and user guides at all-guides.com
➢ Replace belt whenever a burning
➢ Remove lower plate.
➢ Remove agitator by carefully lifting
➢ Remove worn or broken belt.
➢ Loop new belt (Panasonic Type UB8
Agitator
Agitateur
Agitador
➢ Reinstall agitator back into nozzle
➢ After reinstalling the agitator, turn it
End Cap
Bouchon
Tapa del
extremo
➢ Reinstall lower plate.
Groove
Ouverture
Ranura
- 30 -
rubber smell caused by excessive
slippage occurs.
out.
only) around motor shaft and belt
pulley; see illustration for correct
belt routing.
housing grooves.
by hand to make sure that belt is
not twisted or pinched and that all
rotating parts turn freely.