emerio CME-123551.1 Mode D'emploi page 6

CME-123551.1
PARTS DESCRIPTION
1. Lid of reservoir
2. Tray
3. Control Panel (see below)
4. Reservoir with water level indication
5. Thermos jug
6. Brewing chamber
7. Filter basket
8. Reusable mesh filter
9. Lid of thermos jug
10. Anti-drip function
11. Release lever of thermos jug
CONTROL PANEL
A. ON/OFF button
B. Program setting button
C. Minute setting button
D. Hour setting button
E. LCD display
F. Delayed-brew indicator light
G. Working indicator light
OPERATION
Before first-time use:
•
Before using this device for the first time please carefully rinse all detachable components with warm
water.
•
Fill the reservoir with cold water to the maximum water level indication.
•
Afterwards brew water twice without coffee powder.
Use of the thermos jug

To open the lid of the thermos jug, put fingers at the rim of the lid (hollowed parts) and rotate the lid
anticlockwise to make the triangle logo "
the lid and rotate it clockwise until the triangle logo "

The lid of the thermos jug has a safety feature that only when the release lever is pressed down, the coffee
can be poured out from the jug.

The thermos jug can keep the coffee warm during a period of time.
To percolate coffee:
1. Fill the reservoir with cold water.
2. Open the lid of the reservoir and fill it to the desired water level indication. The maximum capacity is 1.5L
(approximate 12 cups).
3. Place the reusable mesh filter into the filter basket and place the filter basket into the brewing chamber.
Use the measuring spoon to add the amount of coffee powder appropriate to the amount of cups you want
to brew. Close the lid of the reservoir.
" pointing at the logo "
" pointing at the logo "
- 5 -
". To close the lid, just place back
".
EN