Siemens HSK61 Instructions D'installation

s
Shield Kit
Installation Instructions / Instructivo de Instalación
Hazardous Voltage
Will cause death or serious injury
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers and close the enclosure door before
power supplying this device is turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados por Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
NOTE - These instructions do not purport to cover
all details or variations in equipment, or to provide
for every possible contingency to be met in
connection with installation, operation or maintenance.
Should further information be desired or
should particular problems arise, which are not
covered sufficiently for the purchaser's purposes,
the matter should be referred to the local Siemens
sales office. The contents of this instruction
manual shall not become part of or modify any
prior or existing agreement, commitment or
relationship. The sales contract contains the entire
obligation of Siemens. The warranty contained in
the contract between the parties is the sole
warranty of Siemens. Any statements contained
herein do not create new warranties or modify the
existing warranty.
Trademarks - Unless otherwise noted, all names
identified by ® are registered trademarks of
Siemens AG or Siemens Industry, Inc.
The remaining trademarks in this publication may
be trademarks whose use by third parties for their
own purposes could violate the rights of the owner.
For Use With: 30-200 Amp Type VBII Fusible Disconnect Switches
Para Usar Con Caja Base: 30-200 Amp Type VBII Fusible Disconnect Switches
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
1 / 6 English
Released Production, 0P v3, Jul 15, 2011
For Use with
Cat No. Switch Amperages
HSK61 30 Amp
HSK623 60 / 100 Amp
HSK64 200 Amp
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Cal. ISO 6789
I.L. No. 500551A00