Basic Playback - JVC XV-NP10S Manuel D'instructions

5
Press ENTER.
The third page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
DIGITAL AUDIO OUTPUT options
6
Press 5 / ∞ to select a desired digital output
signal type.
Set this item correctly when you connect the player to an
external surround decoder or D/A converter. See "DIGITAL
AUDIO OUTPUT" on page 30. (If you do not connect the
player to such a device, you do not have to set this item.)
• When connecting to other digital device, select
[PCM ONLY].
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a Dolby Digital decoder/DTS decoder/
MPEG decoder, select [STREAM/PCM].
7
Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press SET UP for a few seconds until the DVD PLAYER SET UP
display appears.
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM

Basic playback

1
Press 0 (or OPEN/CLOSE on the remote
control unit) to open the disc tray.
2
Place a disc in the disc tray.
• To insert an 8-cm disc, place it in the inner recess.
3
Press 0 (or OPEN/CLOSE on the remote
control unit) to close the disc tray.
4
Press 3 on the player or 3 /SELECT on the
remote control unit.
The player starts playback from the beginning.
• Depending on the disc, playback starts when you close the
disc tray.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, SVCD or Video CD disc, a menu
may be shown on the TV screen. From the menu, you can select
a desired item to be played back.
For DVD VIDEO
1 Press 5/∞/2/3 to select a desired item.
2 Press ENTER.
The player starts playback of the selected item.
For SVCD/Video CD
Press the numeric buttons to select a desired item.
The player starts playback of the selected item.
NOTES
• Do not insert an unplayable disc. (See page 2.)
• When inserting a disc on the disc tray, be sure to position the
disc inside the recess. Otherwise, the disc may be damaged
when the disc tray is closed, or you may not be able to remove
the disc from the player.
• If it takes time to read the loaded disc ("READING" appears on
the display window), remove the disc by pressing OPEN/
CLOSE on the remote control and check the disc.
Basic operations
With the label side up
11