Dexter 1300CIS2-185.5 Manuel D'instructions page 163

FR
2. General Safety Rules
ES
hair can be caught in moving parts.
PT
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. Use
IT
of dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you
PL
to become complacent and ignore tool safety principles. A careless action
can cause severe injury within a fraction of second.
UA
4) Power tool use and care
a
RO
application. The correct power tool will do the job better and safer at the rate
GR
for which it was designed.
b) Do not use the power tool if the switch does not turn it on and o .
EN
Any power tool that cannot be controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/or remove the
battery pack, if detachable, from the power tool before making any
adjustment, changing accessories, or storing power tools. Such preven-
tive safety measures reduce the risk of staring the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition
that may a ect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly main-
tained power tools.
f)
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations di erent from
those intended could result in a hazardous situation.
Do not force the power tool. Use the correct power tool for your
Keep cutting tools sharp and clean. Properly maintained cutting tools
163