Black & Decker SS12 Mode D'emploi page 10

Masquer les pouces Voir aussi pour SS12:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Unit will not start.
Problem
• Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
Recommended accessories for use with your tool are available from your local dealer or
ACCESSORIES
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
The use of any accessory not recommended for use with this tool could be
hazardous.
WARNING:
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling Corporation)
Seal on the nickel-cadmium battery (or battery pack) indicates that the costs to
recycle the battery (or battery pack) at the end of its useful life have already been paid by
Black & Decker. In some areas, it is illegal to place spent nickel-cadmium batteries in the
trash or municipal solid waste stream and the RBRC program provides an environmentally
conscious alternative.
RBRC in cooperation with Black & Decker and other battery users, has established
programs in the United States and Canada to facilitate the collection of spent nickel-
cadmium batteries. Help protect our environment and conserve natural resources by
returning the spent nickel-cadmium battery to an authorized Black & Decker service center
or to your local retailer for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery, or call 1-800-8-BATTERY.
TROUBLESHOOTING
• Battery pack not installed properly.
Possible Cause
• Battery pack not charged.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
10
• Check battery pack
Possible Solution
installation.
• Check battery pack charging
requirements.
charger until red LED
appears.
• Plug charger into a working
outlet. Refer to "Important
Charging Notes" for more
details.
• Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4.5°C) or below
105 degrees F (+40.5°C).

Publicité

Table des Matières
loading

Table des Matières