IRIS Net TPI-8 Mode D'emploi page 12

1. Connect the network connection of your PC to the Ethernet interface
of the TPI-8/TPI-12 directly with a crossover cable, or with a patch
cable and a hub/switch.
2. Activate the power supply system of the TPI-8/TPI-12.
After some seconds a IRIS-Net project signals the successful start activity
of the TPI-8/TPI-12.
3. Click on Start > All Programs > Accessories > Command Prompt.
The window command prompt appears.
4. Enter telnet 192.168.1.101 and tap the return button.
The message „Welcome to IRIS" is displayed
5. Enter doc*update=start and tap the return button.
TPI-8 / TPI-12 Touch Panel
12
Owner's manual
All manuals and user guides at all-guides.com