Operating The Nailer; Methods Of Operation; Lubrication - Interchange NSR83-21HD Manuel D'utilisation

NSR83-21HD
8
All manuals and user guides at all-guides.com

OPERATING THE NAILER

METHODS OF OPERATION

1
Bump Fire (Multi-Fire) *
1
• Hold the trigger and depress the contact arm
against the work surface.
*Caution: DO NOT carry tool with trigger
depressed. This could result in accidental
firing of the tool and personal injury.

LUBRICATION

It is important that the tool be properly lubricated.
Without proper lubrication, the tool will not work
properly and parts will wear prematurely.
• Use INTERCHANGE pneumatic tool lubricant. Do
not use oil with detergent or additives. Use 10w
non-detergent oil only.
• Filter-regulator-lubricator units should always be
used. Keep the lubricator filled with INTERCHANGE
pneumatic tool lubricant.
• If a lubricator is not available, supply 3 to 5 drops of
INTERCHANGE pneumatic tool lubricant into the
air plug on the tool twice a day.
Interchange Brands Framing Nailers: Operator's Manual