Installation Notes - Dometic PERFECTVIEW REC 400 Instructions De Montage Et De Service

All manuals and user guides at all-guides.com
Safety instructions
If you disconnect the negative terminal of the battery, all data stored in the volatile
memories will be lost.
• The following data must be reset, depending on the vehicle equipment options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the operating manual.
2.2

Installation notes

!
CAUTION!
• Secure the parts installed in the vehicle to prevent them from
becoming loose under any circumstances (sudden braking,
accidents) and causing injuries to vehicle occupants.
• Secure any parts of the system concealed by the bodywork in such a
manner that they cannot be come loose or damage other parts or
cables, or impair vehicle functions (steering, pedals, etc).
• Always follow the safety instructions issued by the vehicle
manufacturer.
Some work (e.g. on retention systems such as the AIRBAG etc.) may
only be performed by qualified specialists.
A
NOTICE!
• To prevent damage when drilling, make sure there is sufficient space
on the other side for the drill head to emerge.
• Deburr all drill holes and treat them with a rust-protection agent.
Observe the following instructions when working with electrical parts:
A
NOTICE!
• Only use a diode test lamp or voltmeter to test voltages in electric
cables.
Test lamps with a bulb consume too much voltage, which can damage
the vehicle's electronic system.
• When making electrical connections, ensure that:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp-edged ducts without protection.
• Insulate all connections.
8
REC400
EN