Dometic PERFECTVIEW REC 400 Instructions De Montage Et De Service page 18

All manuals and user guides at all-guides.com
Setting the video recorder
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 14).
➤ Use
or to select the preferred camera input.
➤ Use
or to select the preferred alarm input.
➤ Confirm by pressing
Setting the acceleration sensor
You can set the acceleration sensor under the menu item "G_Sensor Setting".
You can make the following settings:
• "G_Sensor Setting" (on/off) activates or deactivates the acceleration sensor
• "G_Sensor Mode" (automobile mode/truck mode/motorcycle mode) sets the
preferred acceleration sensor mode.
• "G_Sensor Sensitivity" (lowest/low/normal/high/highest) defines the
sensitivity of the acceleration sensor
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 14).
➤ Use
or to select the preferred setting.
➤ Confirm by pressing
Resetting the video recorder to its default settings
You can restore the factory settings of the video recorder under the menu item
"Default Settings".
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 14).
➤ Confirm by pressing "Yes" or
➤ cancel by pressing "No".
18
.
.
REC400
EN