ECOVACS wellbots WINBOT 8 Manuel De L'utilisateur page 10

3. Operating the Robot
1 Loop one end of the Safety Tether to
End A on the Robot Power Cord and
tighten.
2
Connect End A and End B and tighten.
3 Loop the other end of the Safety
Tether around the Safety Pod's
channel and pull it tight.
*
If the length of the power cord restricts WINBOT 8's movement, a WINBOT Extension
Cord can be used. Disconnect End A and End B, and connect them with both ends of the
Extension Cord respectively and tighten.
*
Only one Extension Cord can be used when WINBOT 8 is cleaning an outside window.
8
EN
All manuals and user guides at all-guides.com