The Heat Setting; Bridge Function; Automatic Heat Up; Power Function - AEG HK764403FB Notice D'utilisation

The heat setting

Touch the control bar at the heat setting. Change
up or down, if it is necessary. Do not release be-
fore you have a correct heat setting.

Bridge function

The Bridge function connects two cooking zones and they operate as one.
First set the heat setting for one of the cooking zone.
To activate the Bridge function for left/right cooking zones touch
the heat setting touch one of the left/right control sensors.
To deactivate the Bridge function touch

Automatic Heat Up

You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the illustration),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch (
2. Immediately touch the necessary heat setting. After 3 seconds
play.
To stop the function change the heat setting.

Power function

The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
All manuals and user guides at all-guides.com
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
comes on in the display).
Operating instructions
/ . The cooking zones operate independently.
27
/ . To set or change
comes on in the dis-