AUDIO VIDEO IP WITH 1-6 PB DOOR ENTRY STATION
Mounting the cap option
Stainless steel 316L cap. Dimensions: H 276mm x W 149mm x D 26mm
Flush bottom.
Attach the cap (option ref. 590.9800) on the bottom using 4 screws FX (TORX) M3 x 10.
Connect the entry station.
Attach the front panel with the 6 FX teat screws (TORX) M3 x 10.
To ensure that your intercom is watertight, it is necessary that the front panel, once mounted, rests on the entire seal
between the bottom and the front panel.
Technical data sheet no. 604-0090J
www.castel.fr
FR
EN
Page 18 / 24