Castel XELLIP Serie Manuel D'instructions page 17

AUDIO VIDEO IP WITH 1-6 PB DOOR ENTRY STATION
Surface mounting
Fit the bottom onto the belt (option ref. 590.9220) using 4 screws CZ M3 x 6.
Attach the assembly (base + belt) on support by three screws of diameter 3 to 3.5 max.
Connect the entry station.
Attach the front panel with the 6 FX teat screws (TORX) M3 x 10.
To ensure that your intercom is watertight, it is necessary that the front panel, once mounted, rests on the entire seal
between the bottom and the front panel.
Technical data sheet no. 604-0090J www.castel.fr
FR
EN
Page 17 / 24