Worx HYDRO SHOT WG629 Mode D'emploi page 11

Cleaning (Working mode 2)
WARNING: Do not connect the
machine to water supply
which is turbid, muddy or
corrosive.
NOTE: Not recommended for use with
salt water, immediately rinse with fresh
water for proper maintenance.
Watering (Working mode 1)
ATTACHMENT OF
ACCESSORIES
A number of accessories have been supplied with
this product and are required for use in different
applications. Do not attempt to use cleaning
without a lance or any accessories attached.
1. Soap bottle (WG629.1 only)
Soap bottle provides detergent suds for deeper
cleaning of dirt. It is used in conjunction with power
nozzle or extension lance. (See Fig. N1, N2)
2. Brush (WG629.1 only)
Brush is for cleaning cars, boats, motorcycles
etc. It is used in conjunction with power nozzle or
extension lance. (See Fig. O1, O2)
3. Squeegee (WG629.1 only)
After cleaning the surface with the power nozzle,
then the squeegee is best used to provide a streak
clean surface on glass. (See Fig. P)
MAINTENANCE
Remove the Battery Pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Inspect the product for damaged or worn parts
before each use. Do not operate it if you find
damaged or worn parts. Contact your supplier or the
manufacturer for replacement parts.
Hose filter maintenance
Remove the hose filter from the hose and get out
the strainer. Rinse the parts with clean water before
reassembling. (See Fig. Q1, Q2)
20V Max Lithium Portable Power Cleaner
CLEANING/STORAGE
Before Storage, completely drain all the water from
the machine and hose.
See Fig.
Clean the moulded plastic housing of the machine
K, L
using a soft brush and clean cloth. Do not use water,
solvents or polishes. Store in a secure and dry place
out of the reach of children. Do not place other
objects on the product.
Store the machine and the accessories in a frost free
See Fig. M
place.
11
EN