Cleaning And Storage - ChefsChoice E720 Instructions D'utilisation

CORD SAFETY
A short power supply cord is provided with this appliance to reduce the risk of the cord
becoming entangled, or tripping over it resulting in an injury. While The Legacy Companies
does not recommend it, extension cords are available and may be used if care is exercised in
their use. If an extension cord is used, it must have an integral ground wire, a three prong plug
and the marked electrical rating of the extension cord should be at least 10 amperes. The longer
cord should be arranged so that it will not hang over the counter top or tabletop where it can be
pulled on by children or pets or tripped over.

CLEANING AND STORAGE

Note: Before cleaning or removing any part of the grinder for maintenance, always turn the
unit "off" and unplug the cord from the outlet. Never immerse the motor housing in water or
other liquid.
Cleaning: Grinder parts can be removed and disassembled from the motor housing for thorough
cleaning as described in previous sections (page 5). Wash in warm soapy water with a soft cloth
or sponge. Careful! The cutting blade has very sharp edges and the holes in the grinding plate
also have sharp edges. Keep hands clear!
After cleaning, sparingly coat the grinding plate, cutting blade, auger and locking ring with
vegetable oil.
Never use steel wool or scouring powder on any parts.
Do Not wash any of the detachable parts of the grinder in a dishwasher.
The grinder's motor housing can be cleaned by wiping with a soft, moist cloth.
SERVICE
This appliance is for household use only. No user-serviceable parts are inside.
Refer servicing to qualified personnel.
In the event service is needed, return your grinder to The Legacy Companies, where the cost of
repair or electrical or mechanical adjustment can be estimated before the repair is undertaken. If
failure occurs within the warranty period there may be no charge.
Please include your return address and a brief description of the problem or damage to the
grinder on a separate sheet inside the box.
The Legacy Companies
149 Cleveland Drive, Paris, KY 40361 U.S.A.
chefschoice.com
Made in China.
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the
product. Chef'sChoice®, EdgeCraft®, and the overall design of this product are registered trademarks of the
EdgeCraft Corporation.
Conforms to UL Std. 1083
© 2021 The Legacy Companies
H21 E/F/S G7202z2
English — 8