4: Configure A Room - Danfoss HC Guide D'installation

Installation Guide
Configuration
4. If more devices are installed,
select a device.
7. Select actuator type and press
"OK/Return".

4: Configure a room

1. Select "Heating regulation".
10
Danfoss Link™ HC
5. Select output. Only available
outputs are selectable.
2. Select type of regulation.
VIFZL35X © Danfoss
6. Select heating emitter and press
"Actuator Settings".
• Forecasting method:
by activation of the forecast
method, the system will automati-
cally predict the heating start-up
time necessary to reach desired
room temperature at desired time.
• Regulation type:
only in connection with electrical
heating systems.
04/2011