DOD LS475W Manuel De L'utilisateur page 24

Camera Settings
ISO Stamp
Imprints ISO value (light sensitivity value) on the video file.
On/Off
Default: On.
Set Time Zone
Sets the current time zone for GPS time and date auto calibration. Note the time zone must
be manually adjusted for daylight savings
Speed Units
Select metric or imperial units.
Path Analysis
Calculates the total distance, travel time, and average speed of your journey from the
beginning of your trip to the end (when camera is turned on to when turned off). If Path
Analysis is set to "on", the results will be displayed on the screen when the unit is turned off.
Normal recording will resume If power is reconnected during display.
Default: Off.
Driver Fatigue Warning
Sets a timed delay before showing a visible alert reminding the driver to take a break.
Default: Off.
GPS Logging
On/Off.
Default: On
Head Up Display
Screen will show current speed and direction. If enabled, the set speed warning will also
appear on display.
Default: Off.
Speed Warning
Shows a visual warning on the head-up display when the set speed has been exceeded.
Default: Off.
23