Camera Modes; Recording Mode - DOD LS475W Manuel De L'utilisateur

Camera Modes

Standby Mode: Press【
Press 【 /OK】to stop recording before pressing 【

1.Recording Mode

ISO Sensitivity
File-Lock Indicator
Recording Time
Note: GPS icon flashes when it searches for GPS signal. HUD, Over-Speed Warning and
Speed Camera alerts only work when the GPS signals is stable.
●
Recording Status
Exposure Value
MIC
Power Status
ISO Sensitivity
SOS File Lock
Memory Card Status
GPS Status
Date/Time
】to switch in between Video Recording and Playback Mode.
Flashes when recording.
Indicates the current exposure value setting.
Indicates if the audio recording is on or off.
Indicates the power source and the battery status if external
power is not connected.
Indicates the current ISO value.
Indicates current recording file is locked and protected. This
can be triggered by G-sensor or by pressing the SOS file
lock button,
Indicates if a memory card is inserted.
Flashes whilst the device is searching for satellites. Once the
positioning is done, the icon will be solidly displayed.
Current date and time.
19
】to switch modes.
Memory Card Status
Record Audio (On/Off)
GPS Status
Power Status
Date
Current Time
Exposure Value