Power Supply; Power Supply Connection; Other Precautions - Canon imagePRESS C800 Guide Rapide

▀

Power Supply

This machine has two power cords. Connect each plug of the machine to the independent outlet that is 220 to 240 V
AC 13 A or greater.
WARNING
• Do not use power supplies with voltages other than
those specified herein, as this may result in a fire or
electrical shock.
• Do not use power cords other than the provided
power cord, as this may result in a fire or electrical
shock.
• The provided power cord is intended for use with
this machine. Do not connect the power cord to
other devices.
• Do not damage, modify, pull on, or excessively bend
the power cord. Also do not place heavy objects
on the power cord, as this could cause electrical
damage and result in a fire or electrical shock.
CAUTION
• Do not connect any unauthorized optional products
to the outlet for connecting optional products, as
this could result in a fire or smoke.
IMPORTANT

Power supply connection

• Do not connect the power cord to an uninterruptible
power source.
• If the machine is connected to the power outlet with
multiple sockets, do not use the remaining sockets
to connect other devices.
• It is recommended that the power outlet wired to an
indoor circuit breaker is used.
• When disconnecting the power cord, wait at least 5
seconds before connecting the power cord again.
8
• Do not connect or disconnect the power plug with
wet hands, as this may result in electrical shock.
• Do not connect the power cord to a multiplug
power strip, or do not use extension cords, as this
may cause a fire or electrical shock.
• Do not bundle up or tie the power cord in a knot, as
this may result in a fire or electrical shock.
• Insert the power plug completely into the power
outlet, as failure to do so may result in a fire or
electrical shock.
• When there is thunder and lightning, disconnect the
power plug from the power outlet, as failure to do so
may result in a fire, malfunction, or electrical shock.
• Install this machine near the power outlet and leave
sufficient space around the power plug so that it can
be unplugged easily in an emergency.

Other Precautions

Electrical noise and excessive voltage drop may cause
a malfunction or loss of data in the machine and
computers.