Vimar RADIOCLIMA 01930 Mode D'emploi page 62

15. GLOSSARY
Internal Communication Interface
Device used for connecting the GSM Communicator to the
Radioclima control system.
Network address
Numeric value which the system automatically assigns to each
radio relay actuator or internal communication interface configured
in the system.
Logical address
Numeric value which the system automatically assigns to each
thermostat configured in the system. The primary thermostat is
assigned the logical value 001 by default.
Multi-zone installation
Installation characterised by a number of separate temperature
measurement/control areas.
28 - ENGLISH
All manuals and user guides at all-guides.com
RSSI
between the Radio Base and the peripheral devices.
Received Signal Straight Indication: communication signal level