Vimar RADIOCLIMA 01930 Mode D'emploi page 41

4.3 Thermostat Manager Menu
This function is used for programming or excluding secondary
thermostats.
Press the combination +
Use the key to select the desired function, scrolling through the
sequence beginning with the function
Key Display Description
Eliminate secondary thermostat
(carry out only from primary thermostat)
Receive configuration on secondary thermostat
(carry out only from secondary thermostat)
Send configuration from primary thermostat
(carry out only from primary thermostat)
Press to confirm or
All manuals and user guides at all-guides.com
.
.
to cancel.
4.4 Show firmware version and revision Menu
This function displays the firmware version and revision number of
the Radio Base Station, of the Radio actuators or of the Internal
Communication Interface, according to which is selected.
Press the combination
Use the key to select the desired function, scrolling through the
sequence beginning with the function
Key Display Description
Show firmware version of radio base station
Show firmware version of internal communication
interface
Show firmware version of radio relay actuator (requires
selecting the device via the programming button)
Show thermostat firmware version
After selecting the desired item, three digits will appear on the
display: the first two correspond to the firmware version, and the
third is the revision number.
+ for a few seconds.
.
ENGLISH - 7