Hardware Contents; Preparation - Dyna-Glo DGB515SDP Mode D'emploi

HARDWARE CONTENTS

AA
BB
ST4.8x10 M10
Screw Nut
Qty. 2 Qty. 2
GG
HH
M6
M6
Washer
Spring
Washer
Qty. 2
Qty. 2

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list on previous page and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 50 minutes with 2 people.
Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle,
Plier, Adjustable Wrench
THIS UNIT IS HEAVY. Two people required for safe assembly.
Two people required for safe assembly. Some parts may contain sharp edges. Wear protective
gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and
use and care instructions before attempting to assemble and use.
CC
M10-M6
Wrench
Qty. 2
II
M4x10
Bolt
Qty. 2
CAUTION
EE
DD
M5x12
M6x16
Bolt
Bolt
Qty. 2
Qty. 34
6
FF
M6
Wingnut
Qty. 2