Installation Steps; Care And Cleaning - AVS Bugflector Mode D'emploi

Installation Steps

Press (6) hood inserts into the (6) square holes. If
necessary use tape to hold them firmly in place.
3
Using a phillips screwdriver install (6) screws with (6)
washers at the locations noted in Step 3.
square hole
hood
hood insert
hood shield
washer
screw
5
DO NOT OVER TIGHTEN
Close hood, and install bump ons at pre-cleaned loca-
tions on the painted hood surface.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
800-241-7219 • Visit us at lundinternational.com
© 2016 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Align pre-drilled holes in hood shield with holes in hood. Place
4
Adjust bumper stops as needed to ensure hood shield clears grille
6
Lund International
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
hood shield on hood.
and headlights.