Vaporesso SWAG PX80 Manuel De L'utilisateur page 5

4. Power on the Device
Click the power button 5 times in 2 seconds to power on or power off
the device.
5. Power Adjustment
SWAG PX80 is using the powerful GTX coil platform, and the suggested
power need to be noticed before start vaping.
GTX MESH Coils
Suggested Power
6. Start Vaping
Press the power button to enjoy extraordinary vaping experience.
7. Charge the Battery
After connecting the Type-C cable to the battery, the battery indicator
and remaining charging time will be showed on the screen.
8. Settings
SYSTEM LOCK/UNLOCK: Press power button 3 times.
Press "+"and "–" buttons together to enter the setting interface.
SMART VW: The power of device will be adjusted automatically according
to the coils;
VW: Wattage adjustment mode;
VV: Voltage adjustment mode;
PUFF: The 7 days vaping information will be recorded in the puff counter;
DEFAULT: Restore factory settings;
THEME: Theme Color Selection
EXIT: Back to main interface.
PROTECTIONS
Protections
USB Input Protection
Low Battery Protection
No Load Protection
Short-circuit Protection
Overtime Protection
Overheat Protection
GTX 0.2Ω MESH
45-60W
The USB input voltage is too high.
The battery drops too low.
The device detects no cartridge on the
battery.
The device detects a short-circuit.
Constantly vape for more than 10
seconds.
The device detects an overheated PCBA.
GTX 0.3Ω MESH
32-45W
Situation
English
2