Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connections
Connecting to an Audio System
You can connect this product to the audio system using the methods illustrated below.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder
• Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on the
product to the DIGITAL OPTICAL IN jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
02465B-BD-H6500-ZC-ENG-.indd 12
Method 1
Audio
12
English
Method 2
Audio
2014-01-24 오후 12:19:33
Publicité
Table des Matières
