Samsung NX58J7750S Serie Manuel D'utilisation page 73

Problem
Surface burner
clicks during
operation.
The burners do
not burn evenly.
Very large or
yellow surface
burner flames.
Surface burners
light but oven
burners do not
light.
NX58J7750S _AA_AC_DG68-00623A-02_EN.indd 73
Possible cause
The control knob has been
left in the LITE position.
Surface burner components
and caps are not assembled
correctly and level.
Surface burners are dirty.
Wrong orifice is assembled.
The oven door lock is
turned on.
Gas Pressure Regulator
shut off switch is in the 'off
position.
Action
After the burner lights, turn the control
knob to a desired setting.
If the burner still clicks, contact a
service technician.
See 66.
Clean surface burner components.
(See 65.)
Check the burner orifice size and
contact your installer if you have
the wrong orifice (LP gas instead of
natural gas or natural gas instead of
LP gas).
The display will show the Lock icon.
Hold the oven door open and press the
START/SET button for 3 seconds. The
oven will beep and the Lock icon will
turn off.
Call a qualified service technician.
English 73
2015-06-25 10:16:13