Name Of Parts; Cleaning And Maintenance - Air Naturel SMARTAIR Notice D'utilisation

- Before cleaning the device, switch off the unit and unplug it from the power
source.
- Never use cleaning solvents or chemicals.
- Store the unit in a cool and dry place when not in use.
To clean the outside of the humidifier, use a slightly damp cloth, and wait till the
unit is completely dry before to use it again.
Before refilling the water tank, rinse it and the inside part of the base with water. Be
careful not to put water on the outside part of the unit.
If there is some limescale in the base of the device, you can clean it with water
and white vinegar. Put 2/3 of water and 1/3 of white vinegar in the base of the unit
during 10 minutes. If needed, you can use a brush to clean it. Be careful not to use
the brush on the PCB transducer. If the PCB transducer is dirty, you can delicately
clean it with a soft brush, like a tooth brush for example.
For more information concerning the cleaning of your air humidifier, please visit our
blog:
www.lebienairchezsoi.com
7

NAME OF PARTS

CLEANING AND MAINTENANCE

Nozzle
Water tank
Filtration cartridge
Water tank cork
Power cable
Fan
PCB transducer
Float
Base
Digital screen