hajdu HB300 Manuel De Mise En Service, D'opération Et D'entretien page 71

_________________________________ ___EN__________________________________29
In "Vacation" mode, the automatic temperature setting of 15°C applies to
domestic hot water, and the '
the last day of the mode period set, the "anti-legionella" function is enabled
automatically, and then, the temperature setting is cancelled and reset to the last
setting applied before the activation of the "Vacation" mode.
If the "Vacation" mode already active, pressing the 'VACATION' button again
makes the text '
 To enter the function settings menu, press the 'VACATION' button. Then the
' icon starts flashing and the display shows the '
'
preset days of the vacation mode.
 Use the 'DOWN' or 'UP' arrow to modify the days of the Vacation mode within
the range of 1 to 99. The default value is 14 days.
 Press the 'ENTER' button to confirm the setting. Doing so, you can quit the
settings menu, and the appliance automatically enters into "Vacation" mode.
Setting the clock
 Press the 'CLOCK' button and hold it down for 3 seconds to enter the its
settings menu. The '
starts slowly flashing.
 Set the clock by pressing the 'DOWN' or 'UP' arrow.
 To confirm the clock setting, press the 'CLOCK' button. Then the minute
setting will flash similarly to the hour setting before.
 Set the minutes on the clock by pressing the 'DOWN' or 'UP' arrow.
 Confirm the time setting by pressing the 'ENTER' button.
Setting the timer
All manuals and user guides at all-guides.com
' text displays until the function is enabled. On
' appear on the screen.
' text displays on the screen and the clock value
' text along with the