Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INDICATORS
WATER TANK FULL
BOTTOM FILTER CLOGGED
DOOR FILTER CLOGGED
FAILURE
F..
Find more information in section CARE AND MAINTENANCE, and TROUBLESHOOTING GUIDE .
ENERGY SAVING
AUTOMATIC SWITCH-OFF FUNCTION
ENERGY SAVING TIPS
• To reduce the drying time, make sure that the
laundry is spun with the maximum possible spin
speed of the wash programme . This reduces the
moisture content in the laundry .
• Preferably dry a full load, as indicated in the
Programmes table . This optimises the relative
energy consumption .
• Do not over dry the laundry .
• Clean the door filter after every drying cycle .
• Clean the bottom filter after every fifth drying
cycle .
All manuals and user guides at all-guides.com
=> empty water tank
=> clean bottom filter
=> clean door filter
For any failure indication on
the display, refer to section
TROUBLESHOOTING for more
information .
The dryer is designed to save energy . After the
programme has finished, it therefore switches off
automatically after about a quarter of an hour .
• The optimum ambience temperature for the
dryer is between 15 and 20 °C . In case of a higher
temperature, air the room .
• Use Gentle option only with small loads .
• When drying cotton or synthetics laundry, run
Iron dry and Cupboard dry loads together . Start
the programme with dryness level Iron dry . At the
end of the programme, remove the laundry to be
ironed . Finish the drying process for the remaining
load with dryness level Cupboard dry .
EN
123
Publicité
Table des Matières
