Whirlpool AWZ9CD/PRO Consignes D'installation, D'utilisation Et De Sécurité page 129

WATER DROPLETS ARE
BENEATH THE DRYER
All manuals and user guides at all-guides.com
Bottom filter not inserted
correctly
Lint remaining on bottom filter or
door seal
Water tank not inserted correctly
Direct drain connection not
working properly
Dryer not standing level
• Check position of the bottom
filter and make sure it is
completely integrated in the
filter compartment .
• Remove lint residues on the
rubber seals of bottom filter and
door seal .
• Push in the water tank and
make sure that it is completely
integrated in the tank
compartment .
• Check drain connection and
make sure that the water can
drain .
• Check level position of dryer
on the tabletop with a water
level; if needed adjust the dryer
feet .
(refer to INSTALLATION GUIDE) .
EN
129