Nibe RMU 40 Manuel Installateur page 20

GB
TIP
Wait 24 hours before making a new setting, so
that the room temperature has time to stabilise.
Menu 2 - temporary lux
Setting range: 3, 6 and 12 hours and mode "off"
When hot water requirement has temporarily increased
this menu can be used to select an increase in the hot
water temperature to lux mode for a selectable time.
Caution
If comfort mode "luxury" is selected in the heat
pump/indoor module menu 2.2 no further in-
crease can be carried out.
The function is activated immediately when a time period
is selected and confirmed using the OK button. The time
to the right displays the remaining time at the selected
setting.
When the time has run out the menu returns to "from"
mode.
Select "off" to switch off
20
temporary lux .
Menu 3 - ventilation
Setting range: normal and speed 1–4
Caution
This menu is only displayed for the exhaust air
heat pumps and ground source heat pumps with
the exhaust air module accessory (FLM).
The ventilation in the accommodation can be temporarily
increased or reduced here.
When you have selected a new speed a clock starts a
count down. When the time has counted down the
ventilation speed returns to the normal setting.
If necessary, the different return times can be changed
in the heat pump menu 1.9.6.
Menu 4 - op. mode
op. mode
Setting range: auto, manual, add. heat only
functions
Setting range: addition, heating, cooling
The heat pump/indoor module operating mode is usually
set to "auto". It is also possible to set the heat pump/in-
door module to "add. heat only", but only when an ad-
dition is used, or "manual" the select yourself what
functions are to be permitted.