Menu System; Selecting Options - Nibe RMU 40 Manuel Installateur

GB

Menu system

When RMU 40 is started you come to the information
menu. Basic information about the heat pump/indoor
module is shown here. The indoor temperature is dis-
played in relation to the selected climate system.
Press any button to go to the main menu.
The information menu shows:
on starting
when the back button in the main menu is pressed
after 15 minutes of inactivity.
In the event of an alarm a symbol is shown at the top
edge of the display together with the alarm's number.
Go to the heat pump/indoor module to get more inform-
ation.
Operation
To move the cursor, press the up or down button. The
marked position is brighter and/or has a turned up tab.
Selecting menu
To advance in the menu system select a sub-menu by
marking it by using the up and down buttons and then
pressing the OK button.
18

Selecting options

In an options menu the current selected option is
indicated by a green tick.
To select another option:
1. Mark the applicable option using the up or
down button. One of the options is pre-selec-
ted (white).
2. Press the OK button to confirm the selected
option. The selected option has a green tick.
Setting a value
To set a value:
1. Mark the value you want to set using the
up or down button.
2. Press the OK button. The background of
the value becomes green, which means
that you have accessed the setting mode.
3. Press the up button to increase the value
or the down button to reduce the value.
4. Press the OK button to confirm the value
you have set. To undo and return to the
original value, press the back button.