Led Status - Velleman CAMCOLVC2 Notice D'emploi

All manuals and user guides at all-guides.com
• Always stop recording first before switching off the recorder, otherwise the
data of the last recording session is lost.
• Use the hold switch [A] to lock the record/stop button [J]. This prevents
accidental starting or stopping of the recorder.
• Use the included USB cable to connect the recorder to a computer (not incl.)
to charge the internal battery. When connected, the recorder acts as a
removable disk. The recorded data can be copied, played back or deleted.
• Data is recorded in AVI video format. Free conversion software is available
on the internet.
7.

LED status

power on LED [H]
status LED [I]
USB connection LED [G]
8. Batteries
•
This recorder contains an internal rechargeable battery. When the device is
end-of-life, this battery has to be removed.
•
To do this, remove the 4 screws (see figure below) and the cover.
•
Cut off the battery leads and dispose of the battery in accordance with local
regulations.
WARNING:
Never dispose of batteries in fire, as they could explode.
Keep batteries away from children.
16/07/2009
CAMCOLVC2
off recorder is off
on, blue recorder ready
on, pink recorder is recording
on, green SD card not inserted correctly or full
on, red USB port connected
off USB port not connected or not powered
5
Rev. 01
©2009 Velleman nv