Aux-In Mode; Loudness And Tone Control - PERFECTPRO ROCK-SOLID Manuel De L'utilisateur

Recalling preset stations
1. Press the On/Off button to turn on the device.
2. Press the Source button to switch to FM Radio mode..
3. Briefly press the required Preset button, the display will show the station frequency
and the preset number.
RDS Station Service
RDS (Radio Data System) is an information system which inaudible information is
transmitted in addition to the normal FM radio program. When the radio is receiving
a RDS station and the signal strength is sufficient, the station name will appear in the
display. It may take some time before all the RDS information is available from a station.
Calling up RDS information
When you are listening to a FM station with RDS system, repeatedly press the Info
button to cycle through the information. This will only function if the reception level
is sufficient and clear.
- Program service (PS):
- Program type (PTY):
- Radio text (RT):
- Date and Time:
- Signal strength level (SGLV):
7
All manuals and user guides at all-guides.com
Displays the name of the radio station being
listened to.
Displays the type of station being listened to,
e.g. Pop, Classic, News, etc
Displays the message about the station being
listened to as ticker text.
Displays the current time and date
Displays the station signal strength level being
received.

AUX-IN MODE

A 3.5mm stereo Aux-in socket is provided on the side under the rubber cover, for
connecting an external audio device such as MP3 player or CD player (not included with
this device).
1. Connect an audio source to the Aux-in socket.
2. Press the Source button to select AUX input.
The display will show "AUX-IN".
3. Play the external player.
4. Adjust the volume of both the device and the player for comfortable listening.
5. After use, close the rubber cover to prevent moist or dust from entering into the
sockets and device.
6. If there is no Aux-in signal for an extended period of 15 minutes, the device will
be switched off. When there is 5 minutes left, the device will show a countdown on
the display.
Notes: Never use the Aux-in socket in rainy or moist conditions to prevent moist
from entering the device. Keep the rubber cover closed under these conditions.
LOUDNESS AND TONE CONTROL (BASS/TREBLE)
The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is on a lower volume level (Dynamic
Loudness).
1. Press the Loudness button to enable the loudness, the display shows "Loudness
On".
2. Press the Loudness button again to disable the loudness, the display shows
"Loudness Off".
The tone of the sound can be adjusted to your personal preference.
1. Press the Tone button.
2. Press the Tuning knob to switch between Bass and Treble settings and then rotate
it left or right to adjust the level from -5 to +5.
GB
G B
8