Electrical Connection - Franke FGR 5007 I XS/GLASS Mode D'emploi Et Installation

ELECTRICAL CONNECTION

• Connect the Hood to the Mains power supply, insert-
ing a two-pole switch with a contact gap of at least 3
mm.
• Make sure that the Power cable has been properly
inserted into the Suction fan socket.
• Fasten the commands connector Cmd.
• Fasten the Overhead lights connector Lux to the
socket provided behind the lighting unit cover.
• From the inside, open the Cover of Neon terminal
box by removing the screws.
• Fasten the remaining free connector to the one pro-
vided in the Neon terminal box, then close the cover
and fix it in the predisposed place.
• For the recirculation version, fit the Activated char-
coal odour filter.
• Replace the Grease filter and then the lighting unit.
EN
All manuals and user guides at all-guides.com
Neon
Cmd
Lux
1
10
0