Safety Notes; Important Notes; Functions - marklin 58026 Mode D'emploi

Safety Notes

• This car is to be used only with an operating system designed for it
(DC power = 18V±, Märklin AC, Märklin Digital,
Märklin Systems).
• Use only switched mode power supply units and transformers that
are designed for your local power system.
• Pay close attention to the safety notes in the instructions for your
operating system.
• The wire used for feeder connections to the track may only be a
maximum of 2 meters / 78 inches long.
• Do not expose the model to direct sunlight, extreme changes in
temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions are a component part of the product and
must therefore be kept as well as transferred along with the product
to others.
• Please see your authorized Märklin dealer for repairs or spare parts.
• The warranty card included with this product specifies the warranty
conditions.
• Disposing: www.maerklin.com/en/imprint.html
Betrieb • Operation • Fonctionnement

Functions

• The mode of operation (AC/DC, Mfx, Märklin Motorola, or DCC) is
recognized automatically.
• Possible addresses:
1-80 (Control Unit 6021/Mobile Station 60651/652)
1-255 (Central Station 6021x/Mobile Station 60653)
01 – 10239 DCC
• Address set at the factory: (Märklin) 77 (78) / (DCC) 03
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory:
1./2./3. Klasse
3. Klasse
1./2. Klasse
• Minimum radius for operation: 1020 mm / 40-1/6".
• Märklin claw couplers front and rear. You may have operations
problems if you use other makes of couplers.
7
Exploitatie • Operación • Operazione