Publicité
Les langues disponibles
Les langues disponibles
Fitting kit
- 3 Ø6 insert
- 3 6x15 BHC screws
- 3 Ø6 rubber washers
- 3 plastic collars (to avoid boring the swinging arm)
- 2 Ø5 L: 5mm rubber spacers
- 1 piece of "scratch"
Assembly
- Remove the original chain guard.
- Remove the flexible flap on the swinging arm.
- Fix the front part of the provided chain guard using the screw and the original plastic rivet, or the
"scratch" for the 2008 models. Be careful : this chain guard must not to touch the chain while the
wheel rotation.
- Position the rear hugger and fix it with the original screws on the level on the chain guard, by
inserting, between the swinging arm and the rear hugger, both the rubber spacers.
- Mark the position of the drilling of the 3 inserts, taking care to center the rear hugger.
- Remove the rear hugger. Bore at Ø9 on markings in the swinging arm. Put the inserts with a
custom trade tool. Or use the collars if you do not want to bore the swimming arm.
- Attach the rear hugger, ensuring sure that it remains centered.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of
our painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicules made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* A few tyres, faithful to ETRTO standards, may be in fact bigger and higher than dimensions engraved on the tyre (until + 10 mm). They may be not compatible with undertrays and rear huggers which we made with
original tyres and whose dimensions correspond to these ones engraved on tyre.
* Harden the rear shock absorber while drivings with load or on dented roads.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
FITTING INSTRUCTIONS
ERMAX REAR HUGGER & CHAIN GUARD
ADAPTABLE ON GSX 1300 R 1999 → ∞
Original tyre Michelin Pilot Sport HPX 190/50 ZR 17.
"ATTENTION"
Publicité
