Indoor Unit - Panasonic CS-E18NKUA Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INDOOR UNIT

• Switch off the power at the circuit breaker before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
CLEANING INSTRUCTIONS
CLEANING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 104°F/40°C.
8
5
6
INDOOR UNIT
1
• Wipe the unit gently with a soft, dry cloth.
FRONT PANEL
2
Remove Front Panel
• Raise and pull to remove the front panel.
• Wash gently and dry.
Close Front Panel
• Press down both ends of the front panel to close it securely.
REMOTE CONTROL RECEIVER
3
ALUMINIUM FIN
4
HORIZONTAL AIRFLOW DIRECTION LOUVER
5
• Do not adjust by hand.
VERTICAL AIRFLOW DIRECTION LOUVER
6
• Do not adjust by hand.
2
4
HINT
HINT
• To ensure optimal performance of the unit, cleaning
maintenance has to be carried out at regular intervals. A
dirty unit may cause malfunction and you may see error
code "H99". Please consult authorized dealer.
AUTO OFF/ON BUTTON
7
• Use when remote control is misplaced or a malfunction occurs.
Step
Action
1
Press once.
Press and hold until you hear one
2
beep, then release.
Repeat step 2. Press and hold
3
until you hear two beeps, then
release.
Repeat step 3. Press and hold
4
until you hear three beeps, then
release.
Press the button to turn off.
AIR PURIFYING FILTER
8
Vacuum the air purifying fi lter.
• It is recommended to clean the fi lter every 6 months.
• Replace the fi lter every 3 years or replace any damaged fi lter.
Part no.: CZ-SA20P
AIR FILTERS
9
• Air fi lter cleaning is required every two weeks.
• Wash/rinse the fi lters gently with water to avoid damage to the
fi lter surface.
• Dry the fi lters thoroughly under shade, away from fi re or direct
sunlight.
• Replace any damaged fi lters.
1
7
9
3
Mode
Automatic
Force cooling
Normal cooling
Force heating
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cu-e18nkuaCu-5e36qbuCu-e24nkuaCs-e24nkua

Table des Matières