ingenuity Vesper 10567-ES Mode D'emploi page 24

Swing Timer
Select Button and
Indicator
Slide the Power Switch to power the swing.
The Speed Selector provides 5 speed settings. To start the swing
function, press the button until the flashing LED displays the desired
setting. Gently push the seat to start the swing motion. When the speed
setting is changed during swing motion, the LED will flash during this
speed adjustment.
Use the Swing Timer to turn OFF the swing automatically. Press the
button to select the desired timer setting of 30, 45, or 60 minutes. If a
timer setting is not chosen, the swing uses a default time of 90 minutes
for auto-shutoff. To use the swing function after shutoff, press the Speed
Selector.
Press the Nature Sounds/Music Button to begin music and nature
sounds playback. Auto-shutoff occurs after about 20 minutes.
Push the Volume Control Switch as needed to turn off or adjust the
volume for music and nature sounds.
The Low Battery Detection function detects weak batteries and
suspends normal swing operation. The indicator turns ON (red) when
you press a button when the batteries are weak. To restore normal
operation, replace all batteries.
ENGLISH
Using the Swing Control Module
Low Battery
Indicator red
Speed Selector
Button and Indicator
– 24 –
Power Switch
Volume Control
Switch
Nature Sounds/
Music Button