Cable Connections And Setup - VINCENT PHO-112 Manuel D'utilisation

CABLE CONNECTIONS AND SETUP

Establish the cable connections in the order specified below. Never make
changes to the cable connections while the devices are switched on!
Mechanically identical RCA plugs are available for input and output
connections. Make sure that you do not get these connections confused
during installation! Also make sure that you do not mix up the analogue
inputs for right and left. The RCA plugs for these are frequently colour
coded as follows: red for the right channel, black or white for the left
channel. Make sure that all plugs fit tightly. Inadequate connections can
cause noise interference, failures and malfunctions.
Place the device on a suitable, stable surface. Do not keep it hanging at
its cables. Make sure that the weight of the cabling does not cause the
PHO-112 to lose contact to its base. The phono preamplifier processes
very sensitive electric signals. That is why you should place both applian-
ces at maximum distance to potential sources of disturbance like mains
cables, mobile phones, switching power supplies, transformers, compu-
ters and main amplifiers. To make the most of your system's sound quali-
ty, we recommend placing the equipment on Vincent racks and not put-
ting them on top of each other.
Vincent
24