iKEY-AUDIO M3 Manuel D'instructions page 13

Play Mode
fig. 1.4
File number
SD memory
card usage
File name
Track
Display
(Unit in play mode)
The full color LCD screen (8) displays the
files, folders, recordings, play mode, and
record mode for the M3 unit.
The unit has a built in backlight feature,
however to save energy it turns off after
30-35 seconds. To turn the backlight back
on simply press any button on the front of
13 Connections and System Control
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
the unit, or rotate the jog wheel.
File
format
*Note: When the power adapter (not included) is
connected, the backlight will always be on and
Battery
life
there will be no battery indicator.
Track time
in minutes Recoding with the M3
& seconds
Setup (Input / Output Connections)
Time
mode
MIC IN
LINE IN
MIC IN (5) is where you connect the signal
coming from a microphone source via an
1/8" (3.5 mm) input.
LINE IN (6) is where you connect the signal
coming from a line source via an 1/8" (3.5
mm) input.
*Note: MIC and LINE signals can only be read
one at a time when recording. If they are both
connected to the unit at the same time, only the
MIC connection will be recorded.
PHONES/ LINE OUT (7) sends the signal to
headphones or an output source through an
1/8" (3.5 mm) output.
PHONES/
*Note: Files that were recorded by the iKEY M3
LINE OUT
are named according to the format of the file
fig. 1.5
and are numbered according to the sequence
in which they were recorded. For instance,
iKEY_001.MP3,
MP3, iKEY_002.WAV.
Recording Options
With the M3, several different types of re-
iKEY_001.WAV, iKEY_002.