iKEY-AUDIO M3 Manuel D'instructions page 11

M3 Functions
The iKEY M3 is a portable recorder that allows
you to record, playback, and listen to audio
files. There are two inputs that allow for MIC
and LINE signals to be input. When finished
recording, files can easily be transferred
between the M3 unit and your computer.
Getting Started
To begin using the iKEY M3, you have to en-
sure that it has a working power supply and
that the included SD card (SDHC compat-
ible) is connected.
Power Supply
(options)
Install the 4 AA batteries that came with
the unit by simply removing the battery
11 Connections and System Control
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
compartment cover (1) located
on the back of the unit.
B.
Connect the power adapter to the
DC input (3) located on the left
side of the unit and connect the
other end into an electrical outlet.
fig. 1.2
Note: There is a battery life indicator on the top
right of the LCD screen (8) that drains according
to how much battery life is left.
A.
SD Card Connection
Insert card the way it is shown
Actual Size
G3
The M3 comes with a 1 GB SD card which
stores the recordings. Before turning on the
fig. 1.1
unit, ensure the card is inserted into the slot
(16) located on the bottom of the M3. To
connect the card, push the card completely
Pantone 188c (red)
in the slot until it clicks into place. DO NOT
Pantone 419 U (black)
FORCE THE CARD IN.
To remove the card, slightly push the bot-
tom of the card. It will slide out partially, and
then can be pulled out.
Using the USB drive
On the right side of the device is a USB drive
slot (15) where a USB memory stick can be
fig. 1.3