iKEY-AUDIO M3 Manuel D'instructions page 12

connected. The M3 can both read
files for playback and record di-
rectly to a USB device connected
to this area.
fig. 1.8
The M3 unit will only interact with one
memory device at a time, and the USB drive
gets priority over the SD card. What this
means is that when a USB memory stick is
connected, only files stored on that device
will be viewable. As well, all recordings will
be stored on just the USB drive when it is
connected.
When there is no USB drive connected, the
M3 uses the SD card to read files and store
recordings.
Turning On the Unit
Now that the SD card and power source
are connected, the unit can be turned on
by setting the POWER (2) switch to the ON
position.
Navigating the M3
After the unit is turned on, a menu appears
listing all of the files and folders on the
memory device. Use the RECORD LEVEL/
SEARCH (9) jog wheel to scroll through
these folders & files.
Scrolling clockwise will search downwards
through the file menu & scrolling counter
clockwise will search upwards. Press PLAY/
PAUSE (12) when a folder is highlighted to
view its contents. All recordings are stored
in the folder labeled RECORDS in the iKEY
menu. Press the STOP/BACK (12) button to
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
return to the previous folder.
Playing Files
To engage a file, press the PLAY/PAUSE
button when it is highlighted in the file menu
(*Note: When connecting a new card no files will
be viewable as no media is yet on the device).
Pressing this button again will pause the
playing file. To fast-forward within a track,
scroll the RECORD LEVEL/SEARCH jog
wheel clockwise. Conversely, to rewind,
scroll the jog wheel counterclockwise.
To stop a file that is playing and return the
unit to the file menu, press the STOP/BACK
(12) button.
Connections and System Control
12