Midland BeeperOne Pro Manuel D'utilisation page 17

REMOTE CONTROL VOLUME
Use button to adjust remote control audio volume. Press
button to scroll the two available sound levels: high and low.
The low level is designed to only be heard by the person hold-
ing the remote control.
PAIRING A COLLAR TO THE REMOTE
CONTROL
The remote control and the collar are not paired together at
the time of purchase.
The collar must be paired to the remote control before the
first time use.
If you buy a second collar, it must be paired with the remote
control.
The remote control is paired to the collar using the Charger
with this simple procedure:
› Place the remote control and concerned collar in their re-
spective positions in the charger (both off).
› Make sure the table charger is on (with the power cord in-
serted in the wall socket).
› Hold down the selected button - Yellow (A) or Blue (B) until
a confirmation beep is head to signal successful pairing.
The collar inserted in the charger will now be paired to the
remote control button pressed during the procedure.
When finished, devices can be immediately turned on and
used. If the procedure fails, remove the remote control and
collar from their respective positions and repeat the proce-
dure.
USING TWO COLLARS
To link a second collar to the remote control, follow the proce-
dure indicated in the previous chapter using the button (Yel-
low or Blue) not already linked to the first collar.
To control one or the other collar, simply press the required
collar button (Yellow or Blue) and then the function button.
The number LED that is on indicates which collar is working.
PRECAUTIONS FOR USE
› We recommend you do not use the BeeperOne Pro col-
lar on dogs under 6 months old and to gradually familiarise
puppies with the sound emitted by the collar.
› Before using any collar we recommend you take your dog
to the vet for a check-up.
› It is best to gradually familiarise your dog to BeeperOne
Pro and the sound emitted by the collar. You can adjust vol-
ume according to need, lowering it if deemed necessary.
If you find that your dog does not tollerate the BeeperOne
Pro sound, we recommend you do not persist and contact
your vet.
› For correct BeeperOne Pro operations, it is best to remove
any metallic collar, tag or other object that could cause
noise from your dog's neck. This could prevent the device
from entering pointing mode or interrupt the sound when
the dog is pointing.
› Avoid using BeeperOne Pro indoors: sound power could be
harmful to ear drums.
› It is best to program and adjust sound volume before plac-
ing the collar on your dog.
› The BeeperOne Pro collar is waterproof. Your dog and
cross waterways without any problem. In the event of
prolonged intervals under water, water caught by mud or
leaves could remain trapped in the sound diffuser cavity,
significantly lowering the sound level. In this case, remove
the speaker cap and clean from foreign materials.
› Always store devices appropriatedly being careful to dry
them before storage. Keep devices away from heat or di-
rect sunlight.
› Keep out of reach of children. They could consider it a toy
and, if turned on indoors, irreversibly impairing their hear-
ing.
15