Technical Assistance Service; Warranty Conditions; Technical Information; Important - Bosch POP616B80V Notice D'utilisation

Fault
The burner immediately
switches off after releasing
the control knob.

Technical Assistance Service

When contacting our Technical Assistance Service, please
provide the product number (E-Nr.) and production number
(FD) of the appliance. This information is given on the
specifications plate located on the lower section of the hob and
on the label in the user manual.

Warranty conditions

In the unlikely event that the appliance is damaged or does not
meet your expectations in terms of quality, please inform us as

Technical information

Thermal capacity
Model POP616B80V
Regulation options
Electrical characteristics
NOTE: This product functions using LP gas. The stated thermal
capacity of the burners applies to both types of gas (LP and
natural). If you wish to operate the product using natural gas,
call our service center.

IMPORTANT

Place the pan supports and burners as shown in the
■
diagrams that describe the model.
Maintain the area surrounding the appliance free of
■
flammable materials, gasoline and other flammable vapors or
liquids.
Do not use as a space heater as this may be dangerous.
■
FOR YOUR SAFETY

Environment

To protect the environment, BSH Home Appliances uses
recyclable or reusable materials to package this product.
The packaging provided was used to protect your product for
delivery to your home. Help the environment by discarding
packaging materials responsibly and, if possible, by reusing
them. This creates less waste and promotes the efficient
consumption of natural resources, thus preventing
deforestation.
Old domestic appliances are not useless junk! Responsible
recycling can generate valuable raw materials.
Please help us recycle/reuse these materials by taking them to
designated recycling centers in your community. For more
information about proper waste disposal, contact your local
recycling association or city government.
Your children and the environment will thank you!
14
Possible cause
The control knob was not held down for long
enough.
The grooves on the burner are dirty.
Auxiliary burner
1,00 kW
1
NATURAL GAS G20/17,6 - 19,6 mbar; 1,76 - 1,96 kPa
LP GAS G30/27,5 mbar; 2,75 kPa
110 - 240 V∼ 50/60 Hz
Solution
Once the burner is on, hold the control knob down
a few seconds longer.
Clean the grooves on the burner.
soon as possible. For the warranty to be valid, the appliance
must not have been tampered with, or used inappropriately.
The applicable warranty conditions are those set out by the
company's representative office in the country of purchase.
Detailed information is available from retail outlets. Proof of
purchase must be presented to obtain the benefits of the
warranty.
We reserve the right to introduce changes.
Semi-rapid burner
1,75 kW
2
0,0344/0,0158 A
IF YOU SMELL GAS:
OPEN THE WINDOWS
■
DO NOT TOUCH POWER SWITCHES
■
TURN OFF ALL FLAMES BY CLOSING THE MAIN VALVE
■
CALL THE GAS LEAK HOTLINE OR YOUR GAS PROVIDER
■
FOR YOUR SAFETY
DO NOT STORE GASOLINE OR OTHER FLAMMABLE
■
LIQUIDS NEAR THE APPLIANCE
INSTALL YOUR PRODUCT IN ACCORDANCE WITH THE
■
INSTALLATION GUIDE TO AVOID HEAT DAMAGE TO YOUR
CABINETS
Rapid burner
3,00 kW
1