AEG BEE431011M Notice D'installation page 20

Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
14. ENERGY EFFICIENCY
14.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
20 ENGLISH
Check if...
The fuse is blown.
Problem
The door gasket is dam‐
aged.
The display shows
"12.00".
The lamp does not work.
.........................................
.........................................
.........................................
AEG
BEE431011M 949496317
95.3
A
Check if...
Do not use the oven.
Contact an Authorised
Service Centre.
There was a power cut.
Set the time of day.
The lamp is burnt out.